Weight Sensor (Load Cell) 5KG

Description

This weight sensor (load cell) is suitable for electronic balance and other high accuracy electronic weighing devices.SpecificationsRated load: 5 KgOutput: 1mv / vTemperature zero drift: 0.1% F.SOutput sensitivity: ± 0.15mv / vTemperature sensitivity: 0.05% F.SInsulation resistance: ≥ 2000MΩExcitation voltage: 5-10VDCWire ConnectionThe load cell acts like a bridge, it has 4 colored wires as followsVCC: Red wireGND: Black wireSignal +: Green wireSignal -: White wire Installation in Weight ScaleIt is recommended to use the load cell with Future Electronics Egypt weight scale analog to digital and amplifier module as shown in photo below. In this case you can connect the weight scale module to your Arduino or Micro-controller through serial pins and record or display your measurementsFor basics of load cell and weight sensors, please click here