CA-IS3050U Isolated CAN Transceiver SMD SOP8

Description

CA-IS3050U Isolated CAN Transceiver SMD SOP8 CA-IS3050U is an isolated control area network (CAN) physical layer Transceiver that complies with the technical specifications of the ISO11898-2 standard. This device adopts Using on-chip silicon dioxide (SiO2) capacitors as an isolation layer, the CAN protocol Creates a completely isolated interface between the controller and the physical layer bus, with Used together with an isolated power supply, it blocks noise and interference and prevents damage to sensitive circuit. CA-IS305x can provide separate CAN protocol controller and physical layer bus Differential receive and differential transmit capabilities, signaling rates up to 1Mbps. The device features current limit, overvoltage, and ground loss protection (–40 V to 40 V) and thermal shutdown to prevent output short circuits, common mode The voltage range is –12 V to 12 V. The CA-IS305x is rated from –40°C to 125°C and is available in wide body SOIC8 Features: • Comply with ISO11898-2 standard • Up to 5000VRMS isolation voltage • Logic side I/O voltage range supports 2.5V ~ 5V • Signaling rates up to 1 Mbps • High common-mode transient immunity: 150 kV/μs (typ) • –40 V to 40 V bus fault protection • Low loop delay: – 150 ns (typ) – 210 ns (maximum) • Drive (TXD) master dynamic timeout function • Thermal shutdown protection • Bus supports up to 110 nodes • Unpowered nodes do not interfere with the bus • Temperature range: –40°C to 125°C • Safety and Regulatory Approvals: – In