Power Bank Module With Dual Micro USB 3.7V to 5V 2A Booster With 18650 Lithium Battery Charger

Description

Dual Micro USB 3.7V to 5V 2A Boost Mobile Power Bank DIY 18650 Lithium Battery Charger FeatureLED lights show the power, non-working state of intelligent automatic shutdown;Dual USB output.Built-in lithium battery protection IC, over-current, over-voltage, and under-voltage protection.18650 Lithium li-ion battery dual micro USB booster board parameter.Input port: MicroUSB.Input requirements: 5V constant voltage power supply can be done to charge the input power supply, the most matching charger for 5V1A above (Mobile Charger)Output port: USBOutput parameters: 5V1A/5V2ASize: 8 X 32 X 69 mm (H*W*L)Requirements for rechargeable batteries:Batteries Can be used with module: 18650 battery, cell phone battery, flat battery, MP3 battery, etc. 3.7V-4.2V polymer lithium battery can be single section (chip) power supply, can also be multi-section (chip) parallel power supply (not in series, not in series ). (Note: increase the capacity in parallel, the series is to increase the voltage, can only be used in parallel!)Can be parallel 2-6 18650 battery.Batteries Can not be used with module: dry batteries, batteries, 1.2V rechargeable batteries, nickel-metal hydride batteries, 3.2V lithium iron polymer lithium batteries.18650 Lithium li-ion battery dual micro usb booster board installation should pay attention to the following pointThe battery should be in parallel, the voltage between 3.2-4.2V to work, 18650 flat and polymer batteries can be.The battery is connected to the motherboard B +