SG3525 Inverter Drive Board Adjustable High Frequency DIY Parts

Description

SG3525 Inverter Drive Board Adjustable High Frequency DIY Parts Product parameters: Integrated chip: SG3525 / KA3525 Totem: B772 +D882 Output current: 2.5A Voltage: 8-35V Waveform: square wave High frequency: within 10k to 100KHz (high frequency) Suitable for 500-5000W inverter use. It can drive more than 20 Mosfet Transistor to work normally. There are over-current, short circuit and other protection functions. If you don’t use the protection function, just leave it floating! This driver board is widely used in the inverter pre-stage circuit, simple, reliable, stable performance, adjustable frequency, low price and good quality! It is the best choice for DIY players. Installation guidelines: After receiving the goods, it is recommended to check all the parts and components, and then assemble after the measurement, so that the components are also understood, easy to install, reduce errors, and quickly deal with problems. Electronic products are highly rigorous, and it is not possible to install a wrong part. Therefore, pay attention to the polarity and pin position of the component. You must ensure that each component is installed correctly. Refer to the installation guidelines when installing to ensure the successful installation of the driver board. After installation, check it again, confirm that it is correct and then power on, pay attention to the polarity of the power supply! Reverse connection may cause the components to burn out! It is recommended to string a resistan