Special Liquid Flux 250mL for Dip/Wave Tin Soldering Applications and Flux Sprayers

Description

Special Liquid Flux 250mL for Dip/Wave Tin Soldering Applications and Flux SprayersAssembling electronic boards by dip or wave soldering requires liquid flux to improve the soldering process, minimize defects, and ensure strong and complies joints, enhancing quality and performance for through-hole and SMD components.Features: • No-Clean flux and slightly glossy. • No-residue post soldering, environmentally friendly and safer. • Formulated mostly with an organic alcohol, very small percentage of rosin and non-halide activators. • It’s ideal for Sn63/Pb37 alloy. • High quality and shiny soldering. • Non corrosive and fungus resistant. • 250mL is enough for soldering a lot of PCBs in a few seconds by using dip/wave tin soldering.Usage: • Manufacturing of electrical & electronic boards and photoresist PCB. • It can be used as a spray during assembling and repairing PCB.Usage Recommendations (very important): 1. Ensure that the surface of PCB and its components are clean and free of any residue or dust. 2. Apply the flux to the PCB and its components by using the appropriate method. 3. Soldering Process: * Dip Soldering: Secure the PCB with a holder or crucible plier tong and then immerse it in the molten solder by using an appropriate technique for the soldering machine, this process lasts for a short period (usually 3 to 10 seconds), with a slight movement (optional) to ensure that soldering covers all the points. * Wave Soldering: During this process, the PCB is preheated to a