EG2131 300V 1.5A half bridge IGBT and MOSFET Gate Driver IC SMD SOP8

Description

EG2131 300V 1.5A half bridge IGBT and MOSFET Gate Driver IC SMD SOP8 Chip description EG2131 is a cost-effective high-power MOS tube and IGBT tube gate drive chip. It integrates a logic signal input processing circuit, a dead-time control circuit, an under voltage shutdown circuit, a latch circuit, a level shift circuit, and a pulse circuit. Filter circuit and output drive circuit, dedicated to the drive circuit in brushless motor controllers. The high-end operating voltage of EG2131 can reach 300V, the low-end Vcc power supply voltage range is wide from 11V to 20V, and the static power consumption is less than 100uA. The chip has a latch function to prevent the output power tubes from being turned on at the same time. The input channel HIN has a built-in 200K pull-down resistor. LIN ______It has a built-in pull-up 5V high potential, which keeps the upper and lower power MOS tubes in a closed state when the input is left floating. The output current capacity is IO+/-1/1.5A, and it is packaged in SOP8. Features High-end suspended bootstrap power supply design, withstand voltage up to 300V Adapt to 5V, 3.3V input voltage The highest frequency supports 500KHZ Low-side VCC under voltage shutdown output Output current capability I O +/- 1A/1.5A Built-in dead zone control circuit It has a built-in latch function to completely prevent the upper and lower tube outputs from being turned on at the same time. HIN The input channel is active at high level and controls the high-end HO out