TM06 Wall Mounted Single Color Led Touch Panel Controller glass dimmer switch for LED Strip light (DC12V-24V)

Description

Small convenient touch dimmer module for various LED installations. Just run your LED operating current in series through the dimming unit and you are ready to use the whole thing. Dimmer can be used ranging from single LEDs up to LED strips or any other larger contraptions, as long as the device max current draw is not exceeded. Dimmer unit technical details: Operating principle: Touch operated PWM dimmer for operating LED's Tap button: Stepless dimming through touching the ring Touching M button dims the lights in steps Touching power button turns the light on to last dimming setting or off All the three dimemr channels are driven to the same exact value. So in other words even though there is 3 channels/outputs the dimmer still works as so called 1 channel dimmer. Upon power outage resumes back to last operating state Operating voltage: 12...24VDC Max operating current: 4A/channel according to the specs LED driving has been done through 3x NTD4809NG N-channel MOSFET's According to it's datasheet it has current capacity up to... 58A. So the reality might be somewhere in between (perhaps between 4...10A if the part cooling is sufficient) PWM switching frequency: 250Hz Indicator: Piezo beeper will beep after successful touch of M or power button Controller color: Black Dimmer chassis material: Plastic Dimmer face plate material: Glass Pinout: You'll find it out from the images/product itself Installation method: Mounted through 4x6mm holes which are spaced between 60mm into a